Page | 26
Figure 19 – After making changes on the disk simply switch back to the app and it will sync with the correct numbers. In this case the
clsh08.wav was deleted, but this will even work for swapping out an entire font.
5.5.
EDITING SETTINGS
With the file open, you have access to all the configuration settings from spark. Unlike Igniter™ which has a bunch
of sliders for individual parameters, Spark 3™ has simple dropdown values that represent high-level pre-configured
features. This makes editing a breeze and removes any confusion with what certain settings control.
The following sections go over each tab of the config editor, and give a description on how the settings are used.
5.5.1.
MASTER
The master tab in the NEC Editor contains global settings that generally apply to every font, not just the current
loaded font. The following settings are utilized in the master tab for Spark 3™:
