SINGLE ROPE CHAIR/ROCKER
INSTRUCTIONS
• Rubber Mallet
• Adjustable Wrench
• Phillips Head Screwdriver
(6) Barrel Nuts
(8) Lock nuts
(4) Lock nuts
(1) Allen Wrench
(16) Washers
(8) Washers
(8) 3.5” Hex Bolts
(4) 3.5” Hex Bolts
(4) 4.5” Barrel Bolts
(2) 4” Barrel Bolts
HARDWARE PACK
ROCKER HARDWARE PACK
SUGGESTED TOOLS
NOTE.
Instructions not to scale.
ASSEMBLY
STEP 1.
Start by setting roll-up with left side facing up. Align left arm
with 3 holes as shown. Attach left arm using 3.5” Hex Bolt, with 1 washer
per side, secure with lock washer and repeat for right side.
NOTE.
Do
not
tighten bolts until Step 3, (4 for rocker).
3.5” Hex Bolt
Lock Nut
