48” DOUBLE ROPE SWING
INSTRUCTIONS
• Rubber Mallet
• Adjustable Wrench
• Phillips Head Screwdriver
(6) Barrel Nuts
(4) Locknuts
(1) Allen Wrench
(8) Washers
(2) 2” Hex Bolt
(4) 3.5” Hex Bolts
(2) Tree Hooks and
chain sets
(6) 4.5” Barrel Bolts
• CHAIN SETS: (2)
Eye Bolts, nuts, and washers attached
HARDWARE PACK
CHAIN SET
SUGGESTED TOOLS
LONG
LONG
CHAIN
CHAIN
FRONT
FRONT
SHORT
SHORT
CHAIN
CHAIN
FRONT
FRONT
NOTE.
Add chains after
completeing assembly.
NOTE.
Instructions not to scale.
ASSEMBLY
STEP 1.
Arrange 2 side frames approximately 48” apart. Using Front
Cross support secure with (1) 2” Hex Bolt into the insert on each side.
Align back Cross Support and secure with (1) 4.5” Barrel Bolt per side.
NOTE.
do
not
tighten bolts until Step 4.
4.5” Barrel Bolt
Barrel Nut
2” Hex Bolt
