3
1
XLR/TRS balanced input L
4
XLR/TRS balanced output L
2
XLR/TRS balanced input R
5
XLR/TRSbalanced output R
3
3.5mmmonitor
1.4.3
Bottom inte rface
1)
The bottom interface of the standard version is shown:
2
Installation and Commissioning
1)
Open the box, then take out the power cord and NSCaster device. After that, lay the device on a
stable surface.
2)
Connect the power cord and the corresponding WIFI . Then, use a network cable to connect to the
RJ45 Gigabit Ethernet port.
3)
Connect the output of the AV equipment (such as camera) to the NSCaster device input interface.
The SDI/HDMI camera is connected to the SDI/HDMI input via SDI/HDMI cable as shown
below:
The mixer is connected to the TRS MIC input port through the TRS cable,or the XLR cable is
connected to the XLR input as shown below:
