Nagas ABE Series, Installation, Operation And Maintenance Manual

Page: 4 / 45

4 of 45
Installation, operation, and maintenance manual-ABE Rev 1_2023
1. CODE AND REGULATION
This product is intended to be installed, indoors or outdoors depending on the model, by a qualified installer for
this type of device. This recovery unit is designed for industrial or commercial use only. The must comply with
the latest laws, regulations, and electrical code
CSA C22.1/NFPA 70. All electrical installations must conform to
the electrical diagrams of the unit.
Electrical and airflow requirements are described on the nameplate affixed to the unit. Following these
requirements is mandatory for safe use and performance of the unit.
CAUTION!
CLEARANCES TO COMBUSTIBLE MATERIAL
A minimum clearance of
1
inch is required between the walls of the appliance and any combustible material.
A minimum clearance of
39
inches is required in front of the appliance door to access the controls. Allow
sufficient space around the unit for servicing and around the air intake hood to prevent snow accumulation .
Clearances to combustible materials and
controls access
Position Inch [mm]
Wall of the controls 39 [1000]
Contour walls 1 [25]
Floor None
WARNING!
- Installation, modification, adjustment, or poor maintenance can cause property damage, injury, or death.
Read the installation, start-up and maintenance instructions carefully before installing, using, or repairing
the device.
- The instructions below show the recommended installation and use that we have tested and believe to
be safe. If the installer decides not to follow these instructions, it will be the installer's responsibility to
test and validate the security and functionality.