Nagas ABE Series, Installation, Operation And Maintenance Manual

Page: 25 / 45

25 of 45
Installation, operation, and maintenance manual-ABE Rev 1_2023
Page 1:
Supply Temperature (Supp T°)
Outside Temperature (Outs T°)
Return Temperature (Ret T°)
Exhaust temperature (Exha T°)
Page 2:
Supply air flow Rate (SuppAirFlow)
Return air flow Rate (RetAirFlow)
Cycle Time (Cycle Time) : Time between each damper cycle
Rotate in (Cycle in) : time remaining to cycle the dampers.
Delay Status page
Displays current delays.
Delays status
Cycle In : time remaining to cycle the dampers
Cycle Time: Time between each damper cycle
DelayDampAlar: time before the dampers will be in alarm
FreezStatAlar: time before the Low Freezing Limit will be in alarm
Clock setting page
Allows you to set the date and time in the PLC.
- Left arrow 2 sec, back to menu page
- To change the values: the value is displayed in black, press Ok, the value flashes, with the
down, up, right or left arrows, change the value and then press OK. Once done, go to Adjust
and tap Ok.
Change time, day and date.
Format = dd/mm/yy
Settings page
Opens the Enter Password page to access settings.
- Level 1: Communication, calculation and recuperator
- Level 5 (qualified staff only): PID and advanced menu