22
Y-KH15-007A Rev.3
Turning the span trimmer "S" will also change the zero point.
Avoid applying pressure equal to or higher than the rated
pressure shown on the product label.
Be careful not to turn the span trimmer "S" during zeroing.
13. PRODUCT WARRANTY/ EXPORT ADMINISTRATION REGULATIONS
■
13.1 Product Warranty
If the delivered product within the warranty period (one (1) year from the delivered date) is judged as
a nonconforming product according to "Defect due to the design or manufacturing by Nagano Keiki
Co., Ltd.", they are repaired or replaced with conforming products free of charge.
However, note that the following cases are excluded.
•
Customer or any third party other than us disassemble or modify the delivered product, replace
parts, or add functions;
•
The information described in the User Manual or catalog is not observed;
•
Non-conformance is caused by deterioration due to use, natural disaster, fire or other force
majeure events; and
•
Any secondary damage caused by nonconforming product including the above.
Please note that, regardless of whether the customer recognizes the handling deficiency, any obvious
evidence of deformation, wear or burnout found on parts will be excluded from the warranty scope
and be subject to paid service.
■
13.2 Export Administration Regulations
To export the product, check Foreign Exchange and Foreign Trade Law as well as laws and
regulations regarding United States export administration, and then proceed with the necessary
process of export.
14. OTHERS
This user manual does not cover details or all variants of equipment. It is not intended to support all
events involved that you encounter in installing and maintaining the product.
Therefore, when you need further detailed information, or when the manual does not provide enough
information suited for your intent, contact us.
CAUTION
