S4600-24X2CInstallation Instruction Manual
3 First power-on and start the switch
NADDOD Pte. Ltd.
21
3
First power-on and start the switch
3.1
Build configuration environment and connect cables
Figure 3-1
Build local configuration environment through Console interface
Step 1: Connect the DB-9 cellular type plug of configuration cables to the serial ports of PC
to configure the switch.
Step 2: Connect the RJ-45 end of configuration cables to the configuration interface (Console)
of switch.
Please use DB-9 to RJ-45 cables provided in the box, otherwise it may be incompatible.
3.2
Setting the terminal parameters (Windows hyperterminal)
Step 1.
Open PC, and run terminal simulation program (e.g., hyperterminal attached to Window
system) on the PC;