S4600-24X2CInstallation Instruction Manual
2 Installation instruction
NADDOD Pte. Ltd.
19
2.2.4 Installation and disassembly of power module
Installation procedures
The power module of S4600-24X2C switches is hot-pluggable, and the installation
procedures are as follows:
Step 1:
Wear an electro-static dissipative (ESD) wrist strap, and confirm that it is well
grounded.
Step 2:
Ensure correct upward and downward directions of power supply (otherwise, the
power supply will fail to be installed to the bottom completely).
Step 3:
Hold the handle of power supply module with one hand, and hold the bottom of
power supply module with the other hand. Slide in the power supply module smoothly and
steadily along the power supply slot until the power supply module is completely connected
to the chassis.
Step 4:
Fix the power supply to the switch with the fixing device of power supply.
Figure 2-5 Installation diagram of power supply module
Instruction:
(1): Handle of power module
(2): Fixing devices of power module
Disassembly procedures
The power module of S4600-24X2C switches is hot-pluggable, and the disassembly
procedures are as follows:
Step 1:
Wear an electro-static dissipative (ESD) wrist strap, and confirm that it is well
grounded.
Step 2:
Disconnect the power connection of switch.
Step 3:
Hold the handle of power supply module with one hand while pressing the fixing
device, and press the top of the switch with the other hand.
Step 4:
Pull out the power supply module smoothly along the power supply slot.
Figure 2-6 Disassembly diagram of power supply module