S3600 Series Installation Guide
Initial Startup after Power on of Switches
NADDOD Pte. Ltd.
15
3.2 Setting up Terminal Parameters (Windows
Hyperterminal)
Step 1
Boot PC, and run a terminal emulator on the PC (Windows system is provided with a
hyperterminal);
Step 2
Setting up terminal parameters (example of Windows XP Hyperterminal) The method is as
follows:
1. Go to the hyperterminal window by tapping “start
program-
attached
communication
hyperterminal” to create a new connection, and the “Connection
Description” interface will pop up as shown in the figure.
Figure 3-2
Create A New Connection
2. Type in the
name
of new connection (such as Network) in the pop-up window, click
<
OK
> button, and the “Connect To” interface will pop up as shown in the figure below.
Select a serial port in [
Connect using
] field.
