background image

IMPORTANT SAFETY INSTRUCTIONS

1.

Read these instructions.

2.

Keep these instructions.

3.

Heed all warnings.

4.

Follow all instructions.

5.

Do not use this apparatus near water.

6.

Clean only with dry cloth.

7.

Do not block any ventilation openings.  Install in accordance with the manufacturer's instructions.

8.

Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including 
amplifiers) that produce heat. 

9.

Do not defeat the safety purpose of the polarized or grounding-type plug.  A polarized plug has two blades 
with one wider than the other.  A grounding type plug has two blades and a third grounding prong.  The wide 
blade or the third prong is provided for your safety.  If the provided plug does not fit into your outlet, consult 
an electrician for replacement of the obsolete outlet. 

10.

Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and 
the point where they exit from the apparatus.

11.

Only use attachments/accessories specified by the manufacturer.

12.

Unplug this apparatus during lightning storms or when unused for long periods of time. 

13.

Refer all servicing to qualified service personnel.  Servicing is required when the apparatus has been 
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have 
fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or 
has been dropped. 

14.

WARNING: To reduce the risk of fire or electric shock, this apparatus should not be exposed to rain or 
moisture and objects filled with liquids, such as vases, should not be placed on this apparatus.

15.

To completely disconnect this equipment from the mains, disconnect the power supply cord plug from the 
receptacle.

16. 

The mains plug of the power supply cord shall remain readily operable. 

The lightning flash with arrowhead symbol within an equilateral triangle is intended to 

alert the user to the presence of uninsulated "dangerous voltage” within the product's 
enclosure that may be of sufficient magnitude to constitute a risk of electric shock to 
persons. 

The exclamation point within an equilateral triangle is intended to alert the user to the 
presence of important operating and maintenance (servicing) instructions in the literature 
accompanying the product.  

Notes on environmental protection

At the end of its useful life, this product must not be disposed of with regular household 
waste but must be returned to a collection point for the recycling of electrical and 
electronic equipment. The symbol on the product, user's manual and packaging, point 
this out.

The  materials  can  be  reused  in  accordance  with  their  markings. Through  re-use, 
recycling of raw materials, or other forms of recycling of old products, you are making 
an important contribution to the protection of our environment. 

Your  local  administrative  office  can  advise  you  of  the  responsible  waste  disposal 
point.

2

Summary of Contents for VISO





















Reviews: