®
DD BluOS
Mounting Instructions
WHAT’S IN THE BOX
INSTALL DD BluOS
STEP A
Remove the MDC Classic cover and top cover by loosening and taking out the
screws holding them in place.
Installation location of DD BluOS (as viewed from the rear panel)
C 390DD:
First slot only from the left side
M12:
Any of the three slots from the left side
STEP B
1
Take note of the unique Wi-Fi MAC address (the same can be found at the
DD BluOS metal back plate). This is needed when configuring the DD BluOS.
2
Remove the protective tape from the contact terminals.
3
Slide DD BluOS module through the rail pushing all the way to the
corresponding connectors.
4
Make sure DD BluOS module is locked in.
Use corresponding screws to fix back into place DD BluOS module and top
cover.
4
3
IMPORTANT NOTES
•
Download “Configuring DD BluOS” from the Manuals/Downloads tab at
http://nadelectronics.com/products/hifi-mdc-modules/MDC-DD-BluOS-Module
•
DD BluOS can be integrated to a C 390DD or M12. The reference model used in this mounting instruction is C 390DD.
2
1