Nacra F18 Evolution, Assembly Manual

Page: 25 / 56

10. Measure the length between the middle of the
rudder at the back and front of the rudders.
• Measure at the same horizontal level and
start at 10 cm to measure more precisely.
9. Place the tiller crossbar in between the arms.
• Check if the connector for the tiller extension
is on top.
11. The rudders must face 2 mm inwards, this is
adjustable by changing the rod length.
Port Stbd
Port Stbd
12. Check if the rod length is the same at both sides
and pre-drill with the 3mm drill before you
screw the philips screw.
25
14. If you want to change the rudder rake, change
the rubber for a smaller or bigger rubber.
• Parts are available at www.webshop.
nacrasailing.com
13. Fix the sliding bolt for the kick up tension. Push
the bolt forward and fix the bolt while you’re still
pushing forward. The sliding bolt needs to be
tightend firmly.
• Use the two 7/16 wrenches.