RM03-000
001-0011 Rev.01
LGX® is a registered trademark OFS FITEL, LLC
Page 1 of 4
Universal Rack Mounting 3-Slot
Model RM03-000
SECTION
PAGE #
1.
GENERAL ................................................... 1
2.
APPLICATIONS ......................................... 1
3.
DESCRIPTION .......................................... 1
4.
INSTALLATION .......................................... 2
5.
CUSTOMER SERVICES ........................... 3
6.
WARRANTY AND REPAIRS .................... 3
7.
SPECIFICATIONS ..................................... 4
8.
ORDERING INFORMATION ...................... 4
1. GENERAL
1.1
The NAC RM03-000 is a universal passive
connectivity solution for service demarcations or
inter-facilities termination points. The RM03-000
is a rack or wall mountable housing designed to
deliver multiple fiber services or a combination
of fiber and multi-media services using NAC’s
VLX or LGX™ compatible adapter panels. The
RM03-000 mounting supports three (3) LGX™
compatible adapter panels.
1.2
Whenever this product or document is
changed, it will be reflected in this paragraph.
1.3
The RM03-000 provides the following
features and capabilities:
•
Powder coated steel construction designed
for carrier class applications and
environments.
•
Supports three (3) LGX™ adapter panels.
•
Installation flexibility
o
1 RU height, 19
″
or 23
″
rack
o
Flat, horizontal, or vertical wall
mountable.
o
Adjustable wall mounting depth
•
Dual
⅝″
spaced ground studs
•
Provides cable management, protection, and
security options.
Figure 1. RM03-000
2. APPLICATIONS
2.1
The RM03-000 is typically used as a
service demarcation between the Service
Providers and the End-Users or a service
termination point between Facilities. The RM03-
000 is ideal for applications involving fiber or
multi-media service demarcation or termination
handoffs, such as cell sites, customer premises,
CEV, or OSP cabinets. The Service Provider
typically installs the RM03-000 at the customer
premises as a service demarcation for their
Carrier Ethernet services. The Service Provider
can place their Fiber Multiplexer at a desirable
location or distance.
3. DESCRIPTION
3.1
The RM03-000 is a powder coated steel
designed rack housing consisting of a front, side,
and bottom plates. The front plate has three (3)
slots, where each slot supports an LGX™
compatible adapter panel. The RM03-00 has 3
VLX-100 panels installed as shown above. See
section 8 for other ordering options. The RM03-
000 base plate has an opening to allow rear
cable and LGX™ panel access. The base plate
provides a
⅝″
spaced dual ground studs for
grounding requirements, Figure 2. RM03-000
side plates can support the mounting brackets or
ears in multiple positions and configurations for
rack and wall mounting installations. Further
details are shown in Section 4.
