NAC Image Technology ST-839, User Manual

Page: 243 / 370

Auto View Function Settings
Auto View Function Settings
Function to set to automatically switch to the VIEW mode when the recording is finished.
8-23
(00400)
If the video input with the trigger uses the auto view function, it automatically switches to the VIEW mode.
If split into multiple segments in the memory (

A
4-39), it switches to the next segment when switching to
the ARM mode, and the subsequent video can be made.
The two settings in the auto view function include AUTO and LOOP.

AUTO Auto view repeats until a segment is not recorded. Overwriting to recorded memory
segments is prohibited and switching to recorded segments is not allowed. If switched to
the ARM mode when the subsequent segment has been recorded or overwriting has been
completed up to the last segment, a warning message will be displayed (
① ) and switching is
not allowed.

LOOP Auto view repeats until stopped with the STOP button. Recorded segments are also
overwritten. After recording the final memory segment, it returns to the first memory
segment and continues recording.
Auto View Function Settings