Nabtesco CONPAL NCB-8C-SR, User Manual

Page: 12 / 24

81-SS30095-1
- 12 -
[For Distributors]
The first half of this manual describes information for users. Be sure to read that information along
with the information described for distributors.
6 Information for Distributors
6.1 Warnings and Cautions
6.2 Installing the Product to the Rollator
WARNING
• Firmly tighten the bolts. Otherwise, the CONPAL unit will come off, which can cause the user to fall.
• Check that the stopper is secured in the predetermined position. Failure to do so can cause wheel
disengagement, which can cause the user to fall.
• Adjust the brake force according to the user’s physical activity level.
Brake force that does not match the user’s physical activity level can cause an unexpected fall.
• Do not insert fingers into the adjustment window. Doing so can result in injury.
CAUTION
• Make sure that the product is installed in the correct orientation.
• Do not attempt to adjust the brake force beyond the allowable range. Doing so can result in damage to the brake.
• After adjustment is completed, remove the hexagonal wrench. Keep it in a safe place for future use.
WARNING
• Apply thread-locking fluid to the main body installation nuts and tighten them to the specified torque.
Insufficient tightening can cause play in the installation area or disengagement of the CONPAL unit, which
can cause the user to fall.
• Securely insert the adapter of the CONPAL unit into the indented sections of the rollator.
Insufficient fit can cause play in the installation area or disengagement of the CONPAL unit, which can
cause the user to fall.
• Do not remove the CONPAL unit and install it to another rollator or device. Doing so can cause an
unexpected accident.
• Do not use the product if it was dropped, malfunctions, or produces an abnormal sound. Doing so can
cause an unexpected accident.
CAUTION
• Make sure that the product is installed in the correct orientation. Failure to do so can cause insufficient
brake force, which can cause the user to fall.