13
–
When positioning the appliance, be careful that the electrical cord isn’t squeezed in
order to avoid its damage. Do not store heavy objects such as cooling devices,
furniture or other domestic devices next the appliance in such a way that they could
squeeze and damage the electrical cord. This can cause a short circuit and a fire.
–
Make sure that the plug of the electrical cord is not squeezed by the back wall of
the appliance or otherwise damaged. A damaged plug can be the cause of a fire!
Do not try repair the appliance on your own. Always contact an authorized
technician. To avoid the exposure to danger, always have faulty cable be
replaced only by the manufacturer, by our customer service or by qualified
person whit a cable of same type.
Requirements for safe use:
–
Pull the plug out from the mains socket before each maintenance activity. Do not
pull on the cord, but hold the body of the plug instead.
–
If the appliance is unplugged (for cleaning, moving to another place, etc.), it may
be repeatedly switched on after 15 min.
–
It is forbidden to use a technically damaged appliance.
–
Do not place any switched on electrical devices on top of the appliance because
this may cause ignition of plastic parts. Do not place any dishes with liquids on
top of the appliance and do not keep flowers in vases or other liquid-filled vessels
on the appliance. Do not place heavy objects on the top of the appliance.
–
Do not remove or touch items from the freezer compartment if your hands are wet
or damp.
–
Do not use water spray and steam to clean the appliance.
The appliance should be transported in the vertical position.
The
manufacturer will not be responsible for any damage of the appliance that results
from non-compliance with the instructions for transportation.
The manufacturer guarantees reliable operation of the refrigerator when the
relative air humidity not greater than 70 per cent and the ambient temperature is
+16 TO +32 degrees Celsius - Climate class
N
;
INSTALLATION AND OPERATING CONDITIONS
Positioning:
•
This appliance can be installed in a dry, well ventilated indoor where the ambient temperature
corresponds to the climate class indicated on the rating plate of the appliance.
Do not install this appliance in areas that are too humid or too colds, such as the
construction appendices, garages or wine cellars. Place the appliance away
from heat sources such as kitchen stove/oven, radiators, or direct sunlight. The
appliance must not touch any pipes for heating, gas or water supply, or any
other electrical devices.