
16
•
◄
If
the appliance is placed in a corner, a gap must be left between the appliance
body and the wall so that the freezer compartment door can be opened enough to
pull out the frozen product drawer (see picture).
Installation before using the appliance for the first time:
It is recommended to prepare the appliance for operation with a helper.
•
Remove package. Lift the appliance away from foamed polystyrene base. Tear off
adhesive tapes.
When placing, moving, lifting the appliance, do not hold the
door handles, do not pull the condenser at the rear part of the refrigerator
and do not touch the compressor unit.
•
Remove all red-coloured parts from the shelves. Tear away the adhesive tapes from
the door trays
–
they are intended only for the transport of the appliance.
The appliance
should not be connected
to the
mains until all packing and transport materials aren’t
removed.
•
Take two supports
1
from the bag and insert them into the
guides
2
at the top back part of the appliance (see
picture).
First use:
•
When the unit is fi rst switched on, a slight ‘new’ smell may be noticed. However, this
will disappear once the cooling process has begun.
•
Once the unit has been positioned, wait for about 30 minutes before it is connected to
the mains.
If the appliance
has been tilted more than 30° during
transport, allow it to stand in an upright position for
at least 4 hours before it is connected to the mains
. If
this is not done, the appliance compressor may fail.
•
When first starting-up or after a period out of use, before putting the products in the
compartment let the appliance run at least 2 hours.
Connection to the mains:
•
This appliance should be connected to 220-230V 50Hz supply socket. The socket must
be fitted properly, and must be supplied with an earthling conduit and a 10 A fuse. It
is a legal requirement that the appliance is properly earthed. The manufacturer will
not be held liable for any damage or injury which may result from the failure to fulfil
this requirement.
Summary of Contents for KGR 2122
Page 24: ...23 N F R R N A 2021 08 12...