Nab EFTPOS Ingenico User Manual Download Page 58 | Manualshive

Page: 58 / 64

background image

58

NAB EFTPOS User Guide

Below are some common error messages that may appear on your terminal that you can resolve

Message

Description

Action to take

DECLINED

Card is not supported

Decline transaction.

Advise customer that the card cannot be accepted
by the terminal, and obtain another form of payment

OPERATOR TIMEOUT

The terminal has reached an
inactivity time out

The transaction is cancelled.

Wait for the error message to disappear and the
terminal to return to Idle state. Retry the transaction

SIGNATURE ERROR

Transaction has been cancelled
due to signature mismatch

Obtain another form of payment

TRANSACTION CANCELLED

Transaction has been deliberately
cancelled

Wait for the error message to disappear and the
terminal to return to Idle state. Retry the transaction

CARD EXPIRED

An expired card has been presented
for payment

Decline transaction.

Advise customer that the card has expired, and obtain
another form of payment

BATCH FULL

The transaction batch is full and the
terminal is unable to accept further
transactions

Decline transaction.

Perform manual settlement and retry
the transaction

INVALID NUMBER

Card presented has failed a check
when it was read by the terminal

Decline the transaction.

Wait for the error message to disappear and
the terminal to return to Idle state. Retry the
transaction. If the error persists, advise customer
the card number is invalid and obtain another
form of payment

NO RESPONSE

Communication error, no response
from host

Decline the transaction.

Wait for the error message to disappear and
the terminal to return to Idle state. Retry the
transaction.

POWER FAILED

No power to PINpad

Remove terminal from base, and turn off terminal.
Ensure all cables are plugged in properly, and turn
on the terminal again. Ensure the battery symbol is
flashing (i.e. the terminal is charging).

Retry the transaction

NO SIGNAL/
NETWORK ERROR

No GPRS signal, or terminal is unable
to detect the signal

Decline the transaction.

Restart the terminal and check for the GPRS signal
on the status bar

SYSTEM ERROR

This is a terminal configuration issue

Call the Merchant Services Centre for help to resolve
the issue

Contact the Merchant Services Centre to resolve any other error codes. The numbers to call are noted on page 5.

COMMON ERROR MESSAGES

«
...
56
57
58
59
60
...
»

Summary of Contents for EFTPOS Ingenico

































































Reviews:

No comments

Related manuals for EFTPOS Ingenico

Brand: Beckhoff Pages: 39

Brand: Teltonika Pages: 16

Brand: NCR Pages: 90

Brand: Poindus Pages: 23

Brand: Sagem Monetel Pages: 40

Brand: Toshiba Pages: 3

Brand: Toshiba Pages: 16

ST-7000-C Series

Brand: Toshiba Pages: 18

Brand: Toshiba Pages: 22

Brand: Toshiba Pages: 25

Brand: Toshiba Pages: 22

Brand: Toshiba Pages: 42

VXT 2000 Model VX225

Brand: Digital Equipment Pages: 42

Brand: National Instruments Pages: 8

Brand: Omron Pages: 63

Brand: Texas Instruments Pages: 88

Brand: Savant Pages: 2

Brand: OEZ Pages: 6

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands