ATLAS Control Switches
Figure 8. ATLAS Control Switches
Table 2 below provides descriptions of the switch functionality in different modes. Refer to
Figure 12 above to identify the switches.
Table 2 Functionality of Switches in Different Modes
Normal Mode
Individual Functions
Switch
Function
(Marking)
Description
1
Power / Photo
(POWER)
Powers unit up if pressed and held for three seconds.
Powers unit down if pressed and held for two
seconds.
Takes picture if pressed and released quickly. This
only works if Enable Photo in Normal Mode is set to
YES in Settings.
2
Digital Zoom
(Magnifying
Glass)
Cycles digital zoom settings (1X, 2X, 4X).
3
CE+ / Cal Switch
(
+
)
Increases the Contrast Enhancement (CE) level of
the image if pressed and released.
Performs calibration if pressed and held down for 3
seconds
4
Black/White Hot,
Color/
Edge Detection /
Menu (
MENU
)
Changes White Hot/Black Hot, Color mode, Edge
Detection mode if pressed and released.
NOTE
:
Color mode and Edge Detection mode can be
enabled or disabled in Video Settings Menu.
Enters Menu Mode if pressed and held down for 3
seconds.
5
CE- (
-
)
Decreases the Contrast Enhancement (CE) level of
