18
4.
REMOVING THE MCS II SYSTEM
Fig. 26
To remove the MCS II system from
the helmet, remove the earphone and
the comfort cheek pads as shown in
the assembly operations (Chapter 3).
Then remove the polystyrene cheek
pads. Remove the protection plate,
then, looking at the helmet from the
outside, release the connector by
acting on the fastening clasp as
illustrated in the figure.
After releasing the connector from the shell, also remove the right part by
releasing the Basic kit2 MCS from the shell pins.
Now remove the entire Basic Kit2 MCS from the helmet.
5.
OPERATION OF THE MCS II SYSTEM
Hook up the connection cable to the Harley Davidson / Honda Goldwing, then
to the MCS II system. The audio of the system installed on the motorcycle is
now transferred to the helmet.
You can use the interphone system on the Harley Davidson / Honda Goldwing
by connecting both the pilot’s helmet and the passenger’s to the motorcycle.
Each helmet must be equipped with the MCS II system.
