17
Position the comfort padding in its housing (see specific instructions
provided in the helmet user manual), hooking the neck roll (Fig. 23).
Position both the comfort cheek pads in their housing (see specific
instructions provided in the helmet user manual) making sure that all
the press-studs click.
Note: Carefully check the proper final positioning of the cheek pad, pulling
the chinstrap toward the inside of the helmet and testing the press-studs.
Caution: Make sure that there are no cables sticking out of the helmet and
that the loudspeakers are in their housing.
Caution: Always verify the proper length of the chinstrap and adjust it as
necessary, once again referring to the specific helmet instructions.
Fig. 25
Reposition the protection plate
covering the “N-Com” housing
on the shell. First insert the rear
part and then press the front
part until the fastening clasp
clicks.
