Page 6 / 15
Please leave the product power off when it is not in use.
(It is to prevent an eclectic leakage.)
Open and close the door softly and please use
a door knob.
(A heavy shock can damage the product and breakdown the operating part.)
Do not detach the built-in lamp and electrical devices.
(It can cause an electric shock and a fire.)
Make sure to prevent foreign substances from getting into the sealing silicon of the door.
(The inflow of outside air can cause the change of temperature in chamber and
discoloration of the packing part by a foreign substance.)
⚫
Transportation, Storage and Location of Installation
1. Transportation
DO NOT try to slide or tilt the unit
Permissible ambient temperature range for transport: -10
℃
to 60
℃
.
2. Storage
Do not keep it at place in High Humidity. Permissible ambient humidity: max. 70%
storage in a cold location is the place you transfer the unit to the installation site for
start-up, condensation may form. In this case, Wait at least one hour until the
incubator has attained temperature and is completely dry.
Please check the voltage & Hertz written on serial label
.
(Over-voltage, under-voltage can damage the product and poor performance.)
Do not install in humid place.
(It causes an electric leakage accident and a corrosive of the product.)
Keep this product out of the direct ray of sun and do not install at a hot
place or a place that is near an electric heat.
(The proper room temperature is 20
℃
~ 30
℃
.)
