N.A.T. NAT-AMC-ZYNQUP-FMC, Technical Reference Manual

Page: 48 / 59

NAT-AMC-ZYNQUP-FMC
T
ECHNICAL
R
EFERENCE
M
ANUAL
V1.1
H
ARDWARE
- 48 -
5.3.9. SW3: JTAG MUX Switch
The tables below provide information on the operating parameters and configuration options
of SW3.
Figure 13 – SW3: JTAG MUX Switch
1
2
OFF
ON
Table 26 – SW3 – Operating Parameters
Switch # Function
SW3-1 JTAG Select – FPGA or JTAG-SMT3 module as Master
SW3-2 JTAG Disable
Table 27 – SW3 – Configuration
Switch # ON OFF
SW3-1 Use Backplane as FPGA JTAG Master Use JTAG-SMT3 as FPGA JTAG Master
SW3-2 JTAG Circuits are disabled JTAG Circuits are enabled
Note:
Default configuration is labelled with bold, italic letters .