E N G LI S H F R A N Ç A I S
To use the product with cages, you must use
athletic shoes:
You’ll use the cages on the reverse of the pedal
(diagram B).
First, make sure your shoelaces are tied,
tucked away and not dangling over your foot.
USING PEDAL CLIPS AND CAG E
To use the product with SPD clips:
1. Install the cleats on your SPD-compatible shoes
according to the manufacturer’s instructions.
2. Make sure the pedal is flat and right-side up
(diagram A).
3. Place the cleat on your shoe into the clip and
push down.
4. To release the clip, simply twist your heel away
from the bike until your shoe disengages from
the pedal.
The product is intended to be used
with SPD-compatible clips. Do not use any other
type of clips.
A
B
1. Insert your foot through the cage. Align the ball of
your foot (generally the widest part of your shoe)
over the center of the pedal, and pull the strap
tightly to tighten the cage. Thread the excess
strap through the metal clip.
2. Repeat on the other side and you’re good to go!
3. To remove your foot, squeeze and release the
bottom of the metal clip to release the tension
grip and loosen the cages. Then you can slide
your foot out of the cage.
