background image

                         

 

 

 

                                                               

P e g a z

                                                                         

v e r . 3   z   d n i a   1 8 . 0 5 . 2 0 2 0

 

 

22

 

 

 

Abduction and stabilizing belts

 

Abduction and stabilizing belts

 

are used for additional pelvis 

stabilization and prevent the child from slipping out of the stroller 
(Photo 10.6). The correct way to use them is to wrap the child's 
thighs so that his pelvis adheres as close as possible to the backrest. 
This helps keep a healthier and more comfortable position of the 
child in the stroller.

 

 

Adjustment. 

To adjust the length of the support belt, you must 

move the adjusters on the front belt straps up or down.

 

 

Use. 

To put on abduction and stabilizing belts the child should 

be seated on the fitted straps, then wrap the child's leg and belt 
buckles fasten both to the front of the two tapes. In order to 
remove abduction and stabilizing belts, unfasten the belt buckles of 
the two front straps.

  

11.

 

Additional equipment 

 

Adjustable canopy with window. 

The Pegaz wheelchair can be equipped with an adjustable canopy 
with window, that helps protect the child from the sun or rain 
(Photo 11.1.1). The elements of the booth are: frame (front and 
rear arch), sunroof adjustment mechanism (right and left), two 
snaps with red buttons fastening the roof to the frame, roof 
upholstery, and a window with a mosquito net with a zipper.

  

 

Installation. 

The fastening element for the adjustable hood 

with the window are two plastic elements located on the outer 
sides of the upper part of the frame at the height of the 
headrest.,To assemble the adjustable canopy with the window, set 
the backrest to the upright position, and then simultaneously slide 
both visor latches to the frame mounts. Mount the booth with the 
window in such a way that the back part of the booth's upholstery 
overlaps the back of the stroller.

  

 

Disassembly. 

To disassemble the adjustable canopy with window, press the two red buttons on the 

canopy fastening latches, then slide the booth fasteners out of the mounts on the frame.

 

 

Use. 

In order to change the size of the booth's window area, hold the front arch and the rear arch of 

the booth's frame and bring the arches closer or closer to each other to set the desired position. The 
mechanism adjusting the size of the booth's surface locks automatically. The booth has a removable 
window with a mosquito net, ensuring free air circulation. The window opens and closes with a zipper.

 

 

  Photo 11.1.1 

  Adjustable canopy with window 

Photo 10.6 

Abduction and stabilizing belts

 

Summary of Contents for Special stroller Pegaz





































Reviews: