MyTurn GlobalPC, Getting Started Manual, Page: 92 / 102

G
LOBAL
PC G
ETTING
S
TARTED
G
UIDE
A-4
M
OUSE
P
ROBLEMS
Why doesn’t the mouse cursor move anywhere on the screen?
• Is the mouse plugged into the green connector on the back of the GlobalPC?
Make sure the plug on your mouse cord is firmly attached to the mouse connector on
the rear panel. A loose connection could disable your mouse.
• Check to see if the roller ball on the underside of your mouse is clean.
Often times this area of the mouse will collect debris, especially if you don’t use a
mouse pad. Using a pad (we provide one for you) will help keep your mouse cleaner
longer. If your mouse needs to be cleaned, follow the instructions below.
How to clean your mouse
Shut down your GlobalPC.
Pick up the mouse and turn it over so you can see the roller ball.
Remove the plastic frame that holds the ball in place. To do this push down on
the area and slide up until the frame clicks and releases.
Once the frame is removed, turn the mouse over and catch the roller ball with
your other hand.
Take a cotton ball dampened with rubbing alcohol and gently clean the
surface of the roller ball.
When finished cleaning, dry the roller ball with a lint-free cloth.
Blow into the roller ball cavity on your mouse to remove excess dust and then
place the ball back inside.
Position the frame back in place and click shut.