BROOKLYN BRIDGE
NETWORK QUICK SETUP GUIDE
The Brooklyn Bridge is a streaming device with D/A
and analog section inherited from our best selling
Mytek Brooklyn DAC+.
Follow these guidelines to enjoy your
favourite music collection.
Place the
Brooklyn Bridge
(aka
BB
) on flat and open surface.
Now you need to decide what network connection you want to use: wired via Ethernet cable or Wi-Fi 2.4G.
CONNECTION
Connect Ethernet cable to the socket
or attach included Wi-Fi antenna
If you connected Ethernet
cable please wait until
ethernet icon will show up
Wi-Fi icon will appear on the
screen and show quality of
your wireless connection
Done - you are connected to network
via Ethernet cable!
Done - you are connected to Wi-Fi!
Optionally connect the
BB
outputs to your
system
Connect the
BB
to power outlet
– it will start automatically
1
1
5
6
4
4
11
12
13
7
7
7
7
7
8
5
8
13
9
9
11
10
2
2
1
3
3
The following steps only apply to a Wi-Fi connection
Find “Network” tile by turning a knob clockwise
Wait until “Network” tile is not greyed out
Push a knob to go to menu screen
Select connect tile on
BB
(4
th
button)
Wait up to one minute. You should see informa-
tion that the
BB
is connected to your network
Push a knob to exit to menu.
Select it via corresponding button
Turn a knob to select your local 2,4G Wi-Fi
Select connect tile on BB (4
th
button)
Enter your Wi-Fi password
•
Turn knob to change character on selected position
•
Use arrows (1
st
& 2
nd
buttons) to change cursor
position
