MYSON
DÉCOR KH11 & KH22
Mounting and Fixing instructions.
DÉCOR radiators are high performance,
universal radiators that come with a choice of
connection options;
l
Top bottom same end (TBSE)
l
Top bottom opposite end (TBOE)
l
Bottom bottom opposite end (BBOE).
These instructions show you how to correctly
install the radiator based on your connection
requirements.
IMPORTANT: Screws must be fastened and tightened
as shown in this document. Failure to correctly fasten
the screw will result in the product not functioning
correctly and may cause the product to leak.
Contents
*
A
B
G
C
D
E
F
Model
No. of screws required
Horizontal KH11
2 (1 on each side)
Horizontal KH22
4 (2 on each side)
Your DÉCOR radiator comes with a pack of brackets and screws
that contains the following:
Brackets for horizontal models x 4
(or 6 for larger radiators)
Short plug screws
*
Long separating screw (red end)
*
Decorative screw covers
*
Anti vibe clip (horizontal and vertical only)
Plug and vent
Allen key
Please unpack and carefully check the contents, in the event that
items are missing please contact MYSON immediately and do
not commence the installation.
*quantities vary depending on the model. For full details see table below.
Table of model variations
G
B
C
D
E
F
A
Bracket packet kit for horizontal models.
