page 8 of 28
7. STOP
When the STOP button is pressed the disc stops
playing, and the player goes into “Resume Stop” mode –
with the TV displaying “PRESS PLAY KEY TO
CONTINUE” and the VF display reading “STOP”. If
PLAY/PAUSE or PLAY is pressed in Resume Stop
mode the disc will start playing from the same point at
which STOP was pressed.
A second press of STOP will put the player into STOP
mode. After a short time the disc will stop spinning and
the laser head will be returned to the beginning of the
disc. In stop mode the display continues to read “STOP”.
When the player is in “stop” mode, a single press of the
PLAY/PAUSE button will start the disc playing from the
beginning. The player automatically returns to STOP
mode when a disc has finished playing.
There is no Resume Stop mode when playing CDs.
When STOP is pressed the VF display immediately
changes to read the Table of Contents – the total
number of tracks and total playing time of the disc
If the player is left in Stop, Resume Stop, or Pause mode
for more than about 30 minutes, it will automatically
switch to standby to save power.
8. VIDEO OFF
Pressing the VIDEO OFF button when a CD is loaded
and playing will switch off all the analogue video outputs
to provide the best possible audio quality. The VIDEO
OFF icon in the VF display will be illuminated. A second
press will restore the video outputs. The HDMI output is
not affected.
VIDEO OFF only functions with CDs – and can only be
changed when a disc is actually playing. The video state
will be remembered when changing CDs (although the
video output switches on temporarily whilst the drawer is
open), but the video outputs will automatically switch
back on permanently when a DVD or other video disc is
loaded, or when the unit is switched on from Standby.
9. SKIP/SCAN
The SKIP/SCAN keys are used to select the chapter or
track, or section within a chapter/track, to be played. A
brief press of one of these keys invokes the SKIP
function. Pressing the key and holding it down
continuously invokes the SCAN function.
While a disc is playing, pressing SKIP/SCAN
briefly
will cause the player to skip to the beginning of the next
chapter or track. If SKIP/SCAN
is pressed once, the
player will skip to the beginning of the current
chapter/track. If SKIP/SCAN
is pressed twice in quick
succession the player will skip to the beginning of the
previous chapter/track. Repeated pressing of
SKIP/SCAN
or
will make the player skip forward or
back over any number of chapters/tracks. The SKIP
keys have the same function in PAUSE mode, but
automatically return the player to PLAY mode.
Press and hold SKIP/SCAN
or
until “SCAN“ is
displayed on the VF display (and “x2” on the TV) and
then release to enter fast reverse/forward play at twice
normal speed. Further shorter presses of the same key
will then increase the scan speed to x4, x8, x16 and x32.
One further press will return to normal speed forward
play. Pressing PLAY/PAUSE at any time during high
speed scan will return to normal speed forward play.
SYSTEM OPERATION WITH
SMART MY-LINK
When used as a linked system (which must include a
Smart My-Link® equipped Preamplifier Processor,
Stereo Preamp or Integrated Amplifier) Myryad products
equipped with Smart My-Link® have a number of extra
features that make the system as a whole easier and
quicker to use than a normal hi-fi. These include:
Start-on-Play (DVD)
Press play on the DVD player (or the remote control)
and both the DVD player and amplifier will switch out of
standby (if necessary) and play the DVD. The amplifier
will automatically select the DVD source.
Start-on-Open (DVD)
Press open/close on the DVD player (or the remote
control) and both the DVD player and amplifier will
switch out of standby and the DVD drawer will open. The
amplifier will automatically select the DVD source.
Intelligent Input Selection (Amplifier)
Press a source select button on the remote control and
the system will awaken (if in standby) only the amplifier
and the selected source.
Mute/Pause Control (Amplifier/DVD)
When using the DVD player, selecting mute from the
remote control will mute the amplifier
and
pause the
DVD. When the amplifier mute is cancelled, the DVD will
continue playing.
Power-Saving Mode (Amplifier)
The amplifier can switch the DVD Player, Tuner or CD
player into standby if that source remains unselected for
more than ten minutes.
Automatic Switch-On (DVD/Tuner/CD)
If the standby button on the DVD player, Tuner or CD
player is pressed, the amplifier will also awaken and
select the correct source.