Safety Notes
5
•
•
•
•
•
•
•
•
•
•
•
•
2 Safety Notes
You are advised to observe the safety information during the operation,
maintenance, and repair of the MyQ Recharge Terminal.
Do not place the MyQ Recharge Terminal in a dusty environment or near water
and heat sources.
Do not expose the MyQ Recharge Terminal to rain. Do not allow any liquids
inside the MyQ Recharge Terminal.
Install and use the MyQ Recharge Terminal only in places that meet the
environmental criteria: temperature > 5 to 35 degrees Celsius, and relative
humidity > 30 to 80%.
Connect the MyQ Recharge Terminal to a power source with 230 V AC/ 50 Hz.
Keep the safety regulations and standards.
To prevent overheating, make sure that there is sufficient space around the
MyQ Recharge Terminal for ventilation. Do not cover the ventilation openings
of the MyQ Recharge Terminal.
Do not insert any objects into any MyQ Recharge Terminal openings. Doing so
may result to damage to installed devices, shock hazard, fire or failure of the
MyQ Recharge Terminal.
Do not place any objects on the MyQ Recharge Terminal.
Maintenance and replacement of hardware components should be performed
by trained and qualified personnel only.
Movable parts. Risk of injury for the personnel or damage to the MyQ Recharge
Terminal.
Do not touch the parts marked with the high voltage sign.
Keep all devices inside the MyQ Recharge Terminal clean. Before cleaning the
MyQ Recharge Terminal, disconnect the power supply.
Regularly check the vent openings of the MyQ Recharge Terminal. In case of
dust or any contamination, clean the openings to prevent overheating.
