MYPV ClearSky Plus, User Manual, Page: 46 / 106

Electrical Terminations 46
Electrical Terminations
The myPV ClearSky™ PLUS Interconnection is designed to electrically terminate in the
same manner as a pad-mounted transformer. Here’s what you can expect.
Overview
The myPV ClearSky PLUS is designed to be very easy to install, requiring medium
voltage (MV) separable connectors, low voltage (LV) lugged terminations, and ground-
ring terminations.
Details for your MV Contractor:
There are a total of six (6) MV separable connector terminations required
The MV separable connectors will be either 200A load-break or 600A dead-break
IEEE 386 compatible interfaces
Whether 200A or 600A, all bushing wells and inserts will be shipped with the device
… your MV contractor only needs to purchase and install the “elbows”
Parking stands are installed for all six (6) connections, however parking bushings
are not included (as these are not required for normal commercial operation)
The MV Termination Cabinet and the LV Termination Cabinet each have a solid
copper 3/8” diameter rod installed across the bottom opening of the cabinet entry.
The ground ring will need to be attached to the grounding rod per applicable
standards where the myPV ClearSky™ PLUS is being installed.