AC•THOR
®
9s Montageanleitung / Assembly Instructions, Version 190716
16
Connections
Assembly
Remove the wall bracket from the rear of the AC•THOR 9s unit. To do this, slide the lock
underneath to the right.
Then fix the wall bracket to the wall with three screws. Three screws and three wall-plugs are
supplied. If the screws supplied are not suitable for the substrate, suitable screw must be
obtained.
Wall bracket
lock
4 Temp.
sensors
PWM
Signal
SD Card
Slot
Ethernet
RJ45
Mains connection
3 x 230 V
Load
connections
Relais
16A
NC W NO