Mylex PCI Disk Array Controller Drivers 08P4100 Installation And User Manual Download Page 51

Page: 51 / 100

Windows 2000

Manual No. 775079

4-15

Windows NT 4.0 with GAM Server/GAM Client Installed

If you are running a system with Windows NT 4.0 with a Mylex controller
and GAM Server and/or GAM Client is already installed, follow the
directions below:

1. If GAM Server is installed, open Services, select Mylex Global Array

Manager Server, and click the Stop button.

2. Open the Add/Remove Programs utility and uninstall GAM Server

and/or GAM Client.

3. Install Microsoft Windows 2000 upgrade.

4. After the Windows 2000 upgrade, go to “Updating the Mylex

Controller Driver” on page 4-16 for driver update instructions.

Windows NT 4.0 with a Mylex Controller with MACDISK installed

If you are running a system with Windows NT 4.0 and MACDISK already
installed, follow the directions below:

1. Open the “SCSI Adapters” Control Panel and remove the Mylex

Accelerated Driver.

2. Upgrade your system to Windows 2000.

When Windows 2000 upgrade is finished, go to “Updating the Mylex
Controller Driver” on page 4-16.

Summary of Contents for PCI Disk Array Controller Drivers 08P4100





































































































Search results

Summary of Contents for PCI Disk Array Controller Drivers 08P4100

Reviews:

Related manuals for PCI Disk Array Controller Drivers 08P4100

Brands by name

Popular brands

Mylex PCI Disk Array Controller Drivers 08P4100, Installation And User Manual

Search results

Summary of Contents for PCI Disk Array Controller Drivers 08P4100

Reviews:

Related manuals for PCI Disk Array Controller Drivers 08P4100

Brands by name

Popular brands