Drive Configuration
Manual No. 775029
2-3
Figure 2-1. RAID EzAssist Scans for Controllers and Drives
☞
Allow scanning to complete.
How Do I Begin to Configure a Mylex Controller?
What happens after RAID EzAssist starts up depends on the answers to the
following questions:
1. Are there multiple Mylex controllers installed?
If so, see “How Do I Configure Multiple Mylex Controllers?” in
Chapter 1.
2. Is this a first-time configuration?
If no previous configuration has been set on the controller, see the “Get
Started” step in “How Do I Configure a Mylex Controller for the First
Time?” in Chapter 1.
3. Is there an existing configuration on the controller, but there are still
unconfigured drives remaining?
If RAID EzAssist detects unconfigured drives on the controller, it will
ask if you want to configure those drives now (Figure 2-2).
