Advanced Options
Manual No. 775029
5-5
Figure 5-4. Flash Code Update
❑
Choose Controllers to Update.
The image file is read from the diskette, then the contents of the image file
are displayed in the gray field at the top of the screen.
This screen uses the following navigation strategy:
• PgDn and PgUp show you all the available or selected controllers if
there is a small down/up-arrow beside the Controller field.
• Inside the Controller field, arrow keys select a controller. Enter accepts
the highlighted controller and adds a check mark, OR deselects a
controller that already has a check mark. You may select more than one
controller.
• The Tab key shifts control to the buttons, or from the buttons back to
the Controller field.
• When buttons are in focus, arrow keys select a button and Enter
activates the highlighted button.
☞
Use the arrow keys to select a controller you wish to update,
then press Enter. Repeat to select additional controllers.
The currently active controller is selected by default.