Mylex Disk Array controller Software Kit 2.01, Installation Manual And User'S Manual

Page: 39 / 172

NetWare
Manual No. 771929 2-19
N
E
T
W
A
R
E
2
Command Queue. Scale that shows the number of commands sent to the
controller, pending response.
Controller I/Os per second. Scale that displays the approximate number of
I/O operations per second the controller is performing. This gives a rough
indication of system performance. The lighter portion of the scale represents
the reads, and the darker portion represents the writes.
KBs per second. Scale that shows the controller throughput in kilobytes per
second (Kbs). The lighter portion of the scale represents the reads, and the
darker portion represents the writes.
System Administration (DACADM) Utility for
NetWare 4.11/4.2 and 5.0
Loading the System Administration Utility
The Dacadm utility is copied to disk when GAM Server is installed.
1. To load the main DAC System Administration utility, at the server
console, type:
: load dacadm
When loading, module loading messages will be shown on the console.
A screen containing the main Selection Menu of the System
Administration utility will be displayed when loading is complete.
The main menu of the DAC System Administration utility has a title bar at
the top of the window that shows the name of the utility. The currently
selected controller is highlighted in a small rectangle, (pink on a color
monitor) at the upper right of the window below the title bar. A selection
menu with various options is also displayed in a smaller window.
After the System Administration utility is loaded on the file server, the F1
key can be used at anytime to invoke on-line help for an overall description
of the utility, or for individual options.