Mylex Disk Array controller Software Kit 2.01, Installation Manual And User'S Manual

Page: 157 / 172

RAID Fault Management
Manual No. 771929 C-3
A
P
P
E
N
D
I
C
E
S
C
RAIDBLD Command Line Parameters
For a list of available parameters while online, type:
raidbld -?
↵
The basic structure of the RAIDBLD command line is as follows:
raidbld -[param] [value, (if required)] -[param] [value]..., etc.
Each parameter must be preceded by a dash “-“. Several parameters require a
value which directly follows the parameter. Parameters and values are
separated by a space.
Table C-1 beginning on the next page displays the following information for
each RAIDBLD parameter:
• The parameter switch (such as -s, -R, etc.)
• Valid parameter values, as well as the default value
• An example of the use of the parameter [value]
• A description of what the parameter’s function is.