Mylex Disk Array controller Software Kit 2.01, Installation Manual And User'S Manual

Page: 153 / 172

Installing TCP/IP
Manual No. 771929 B-3
A
P
P
E
N
D
I
C
E
S
B
Installing TCP/IP - Windows NT
TCP/IP is included with Windows NT. To install TCP/IP, complete the
following procedure.
1. Select Control Panel from the Main program group.
2. Double-click the Network icon.
3. Select Add Software.
4. Highlight TCP/IP Protocol and Related Components and click the
Load Software button.
Configuring the IP Address
1. After loading the software, click the Configure button.
2. Enter an IP Address for the network card. Be sure to follow the rules
that exist for IP addressing.
The Subnet Mask is generally set for 255.255.255.0.
For information on IP addressing, refer to the Windows NT
documentation.
3. Save all settings.
4. Shut down and restart the server.
5. Test the Server using the “Ping” command from a workstation. If the
systems are correctly configured, a reply is received.