Mylex Disk Array controller Software Kit 2.01, Installation Manual And User'S Manual

Page: 148 / 172

MYLEXRAIDMIB Object Definitions
A-24 Disk Array Controller Software Kit User’s Manual
RAID Event Information Group
This object is used to obtain information on events that occur for any or all of
the controllers. This group’s information is used to send SNMP traps to the
SNMP Manager workstation.
Table A-11. RAID Event Information Group
Table object Data
Type
Description
a9EventTableIndex
1.3.6.1.4.1.1608.1.1.1.9.1.1 Integer The index to the Event Table
a9EventCode
1.3.6.1.4.1.1608.1.1.1.9.1.2 Integer Numerical identification of the
event codes for events. (For
event codes, see “Traps”
beginning on page A-6)
a9EventTimeStamp
1.3.6.1.4.1.1608.1.1.1.9.1.3 Integer The time associated with the
event. This is provided as the
number of seconds since
midnight, January 1, 1970.
a9ControllerNumber
1.3.6.1.4.1.1608.1.1.1.9.1.4 Integer References a particular
controller by its controller
number
a9ChannelNumber
1.3.6.1.4.1.1608.1.1.1.9.1.5 Integer SCSI channel number; valid for
physical drive events and fault
management events
a9TargetNumber
1.3.6.1.4.1.1608.1.1.1.9.1.6 Integer SCSI target ID; valid for physical
drive events
a9LunNumber
1.3.6.1.4.1.1608.1.1.1.9.1.7 Integer SCSI logical unit number (LUN)
of the physical device; valid for
physical drive events
a9LogicalDriveNumber
1.3.6.1.4.1.1608.1.1.1.9.1.8 Integer The logical drive number; valid
for logical drive events
a9FmtCabinetNumber
1.3.6.1.4.1.1608.1.1.1.9.1.9 Integer The fault management cabinet
number; valid for fault
management events
a9FanUnitNumber
1.3.6.1.4.1.1608.1.1.1.9.1.10 Integer The fan unit number in the fault
management cabinet; valid for
fault management events
a9PowerSupplyUnitNumber
1.3.6.1.4.1.1608.1.1.1.9.1.11 Integer The power supply unit number
in the fault management
cabinet; valid for fault
management events
a9HeatSensorUnitNumber
1.3.6.1.4.1.1608.1.1.1.9.1.12 Integer The heat sensor unit number