Mylex Disk Array controller Software Kit 2.01, Installation Manual And User'S Manual

Page: 138 / 172

MYLEXRAIDMIB Object Definitions
A-14 Disk Array Controller Software Kit User’s Manual
Logical Drive Information Group
This object is used to determine information about any or all the logical
drives present in the system.
Table A-5. Logical Drive Information Group
Table object Data
Type
Description
a3ControllerNumber
1.3.6.1.4.1.1608.1.1.1.3.1.1 Integer References a particular
controller by its controller
number
a3LogicalDriveNumber
1.3.6.1.4.1.1608.1.1.1.3.1.2 Integer The logical drive number
a3OperationalState
1.3.6.1.4.1.1608.1.1.1.3.1.3 Integer Numerical identification of the
logical drive state:
Value Meaning
3 ONLINE
4 CRITICAL
255 OFFLINE
a3RaidLevel
1.3.6.1.4.1.1608.1.1.1.3.1.4 Integer The RAID level selected for the
logical drive
a3WritePolicy
1.3.6.1.4.1.1608.1.1.1.3.1.5 Integer Numerical identification of the
write policy setting for the logical
drive:
Value Meaning
1 WRITE THRU
2 WRITE BACK
3 Unknown
a3SizeInMb
1.3.6.1.4.1.1608.1.1.1.3.1.6 Integer The logical drive capacity in MB
a3PhysicalSizeInMb
1.3.6.1.4.1.1608.1.1.1.3.1.7 Integer The total physical capacity used
by this logical drive in MB
a3StripeSizeInBytes
1.3.6.1.4.1.1608.1.1.1.3.1.8 Integer The value of the stripe size in
bytes
a3PhysicalDriveMap
1.3.6.1.4.1.1608.1.1.1.3.1.9 Display
String A displayable ASCII string
containing the list of all physical
drives that make up the logical
drive. For example, (0-1 0-2 1-3
1-11)
a3ArrayList
1.3.6.1.4.1.1608.1.1.1.3.1.10 Display
String The list of arrays across which
this logical drive spans. For
example, A B, etc.