Mylex Disk Array controller Software Kit 2.01, Installation Manual And User'S Manual

Page: 127 / 172

SNMP Installation, Operation & Definition
Manual No. 771929 A-3
A
P
P
E
N
D
I
C
E
S
A
SNMP Installation for Windows NT
To enable the SNMP agent for Windows NT, configure Windows NT for
TCP/IP and SNMP services. The Mylex SNMP Extension Agent file is
GAMAGENT.DLL.
Install the SNMP Agent
The Global Array Manager Server installation will copy the necessary files
for the Mylex SNMP Extension Agent DLL to be added to the Windows NT
registry. If the SNMP agent is required, you should make sure that TCP/IP
and Windows NT SNMP services are configured correctly.
SNMP Installation for UnixWare
To enable the SNMP agent for UnixWare, configure UnixWare for TCP/IP
and SNMP services.
Install the SNMP Agent
The Global Array Manager Server installation will copy the necessary files
for the Mylex SNMP Peer Daemon. If the SNMP agent is required, you
should make sure that TCP/IP and UnixWare SNMP services are configured
correctly.
Installation Notes
The following files must be edited in order for the SNMP SMUX Peer
daemon (gamagent) to work:
• /etc/netmgt/snmpd.peers - SMUX Peers file
• /etc/netmgt/snmpd.trap - TRAP file
The
snmpd.peers
file contains information which the SNMP agent/server
daemon,
snmpd(1M)
, uses to authenticate requests from SMUX Peers to
register subtrees (MIB Subtrees) with the SNMP agent/server.
The format of each entry in this file is:
name object-id password [priority]