Mylex Disk Array controller Software Kit 2.01, Installation Manual And User'S Manual

Page: 126 / 172

SNMP Installation for NetWare
A-2 Disk Array Controller Software Kit User’s Manual
Depending upon the SNMP management application used, the MIB (an
ASCII text file named MLXRAID.MIB) must be placed in a specific
directory on the network management station running the management
application. The MLXRAID.MIB file must be manually copied to this
directory. For example:
Table A-2. Location for MIB
☛
Note
Your management application may have a different
target directory. Consult the management
application’s user guide for the correct location.
Starting the NetWare Agent
To start the agent, enter the appropriate command from the system console:
LOAD GAMAGENT
↵
About the NetWare Agent
The GAMAGENT NLM assumes that SNMP support for NetWare servers
(SNMP.NLM) is already installed on the server.
The GAMAGENT NLM will attempt to autoload the SNMP.NLM. If the
SNMP.NLM file is not present, the agent will not load.
The command to load the agent can be incorporated into the
AUTOEXEC.NCF or other operating system startup files as well.
SNMP Application MIB location
OpenView \OV\MIBS
NetWare NMS \NMS\SNMPMIBS\CURRENT