Mylex Disk Array controller Software Kit 2.01, Installation Manual And User'S Manual

Page: 118 / 172

Global Array Manager Server Software and Utilities for UnixWare
5-14 Disk Array Controller Software Kit User’s Manual
Verifying Correct Server Software Installation
In Case of Problems...
Problem: An error is encountered when trying to connect to a
server.
Check: Is the IP address of the Server correct?
Check: Is the installation complete? Was the software successfully
loaded on the server?
Check: Is the Ethernet connection good?
Check: Is TCP/IP installed?
Check: Is TCP/IP set up correctly? Try Ping to find the server.
Problem: Global Array Manager Server does not load.
Check: Do you have login rights to the root?
Check: Did all of the server files load to the destination directory?
Do you have sufficient disk space for the installation? If
necessary, reinstall the software.
Running Global Array Manager Server
The Global Array Manager Server runs on the server and performs the
following functions:
• Monitors the controller(s) and disks in the server.
• Manages the controller(s) and associated disk subsystems in the server.
• Sends information to Global Array Manager Clients (if used).
The installation of Global Array Manager Server for UnixWare causes the
appropriate drivers to load automatically at system startup. No additional
actions are required to start GAM Server beyond a system boot.