Connecting MYIRO-9 to Computer
Setting network settings via DHCP
If your network has DHCP enabled, you can set DHCP on the MYIRO-9 to “ON” and allow your system to automatically allot the IP address,
subnet mask, and default gateway.
Changing the DHCP setting
1
Press
to open the settings screen.
2
Press
or
repeatedly to select “DHCP” and press
.
3
Press
or
to change the setting to the desired setting.
ON: Network settings are performed automatically via DHCP.
OFF: Network settings are not performed automatically.
4
Press
to select “SAVE DATA” and press
. The message “Caution: It
reboots after saving setting data” will be shown.
5
Press
to save the settings and reboot the MYIRO-9.
26
