20.Make sure to distinguish inhale hole from exhale hole. DO NOT insert the hydro
spray jet into the inhale hole to avoid any possible damage to the machine.
21.When operating the facial cleaning scrubber, the groove is outwards and the water
droplets will be seen splashing around in the form of water mist. Hold the cleaning
scrubber upside down and apply the flat surface to the skin for nutrients absorption
and skin lifting.
4. Troubleshooting & Solutions
1. The instrument can't start and the key lamp on the back of the instrument doesn't
work?
A. Ensure that the power cord is connected to a working power outlet.
B. Ensure the fuse tube on the back of the instrument is not loose or being burnt.
2. No response to the button of cleaning Scrubber?
A. Turn off the instrument and restart it.
B. Remove the plug of the probe and install it again.
3. The microdermabrasion has no suction?
A. Please check whether the rubber ring of the operating head is screwed too tight,
resulting in air leakage.
B. Please check whether there is any rubber ring installed.
C. Please check whether the rubber hose is properly connected to the main engine
and whether there is any damage to the rubber hose.
4. No spray coming from the hydro spray jet?
A. Please check whether the nozzle is blocked.
B. Please check whether the regulating part of the nozzle tail is tightened.
C. Please check whether the wrench of the spray gun is loose.
5. FAQs
1.Q: Will the skin become thinner and more sensitive after microdermabrasion
treatment?
A: No. During the process, microdermabrasion operation is just to remove the skin
Summary of Contents for SR-MJ1804
Page 1: ...User Manual SR MJ1804 ...
