suggest users add a voltage regulator with matching power between the main
supply and the equipment.
(3) Please uniformly use specified parts provided or indicated by their original
manufacturer to guarantee the equipment's curative effect and normal service
life.
(4) Do not put the equipment near a water source, in a damp place, or in a site that
directly exposes it to sunlight.
(5) Do not place the equipment near an intense heat source since this may affect its
service life and everyday use.
(6) Please remove all metal objects from your body before treatment to shun
unexpected situations that may affect its curative effect.
(7) Please do not use the equipment on eyes, thyroid, parathyroid, testicles, a
pregnant woman's abdomen, a body part with a pulse generator, etc.
(8) If you are suffering from an illness, you should use it with caution unless you get
permission from a doctor.
(9) Please turn off the equipment's power switch if no one uses it, and ensure its
main power is off before the exit of related personnel to guarantee the
equipment's safety.
(10) Start with the lowest energy level and gradually increase it after getting used to it.
(11) After an operation, clean the equipment with normal saline to ensure its
cleanliness and hygiene to extend its service life.
(12) You can use the handpieces separately, but you can use them together to achieve
a better effect.
(13) During an operation, a handpiece should contact the skin thoroughly to avoid
uneven heating.
(14) When using the equipment, you must keep treated parts wet and avoid operating
it under dry skin conditions.
(15) It's advised to stop taking other weight-loss medicines for 1 to 2 months before
treatment if you are taking them now. A course of treatment shall be extended if
you want to start it immediately.
(16) Do not use 40k on a head, chest, breast, heart, and back.
(17) When using a vacuum cooling head, you must apply a matched antifreeze
membrane to a treated part to avoid operating it in dry skin conditions or directly.
(18) You must fasten laser pads onto a client first, and then turn on the equipment and
adjust the pads’ energy level, which should be set from low to high slowly to
make the client feel warm and comfortable.
(19) When using a laser pad, its whole surface should contact the skin thoroughly; it
can not only touch a small area.
(20) Strictly use the equipment and train operators per instructions specified in the
manual.
4. Troubleshooting
(1) I can't start the equipment, and its indicator lamp in the back doesn't light up.
Summary of Contents for MS-7206F
Page 1: ...User Manual MS 7206F ...
