mychefcooking.com
PRODUCT MANUAL COOK UP | COOK PRO - DT.MP.CK.2102.2
30
Never open the oven door during an automatic cleaning process.
The process can be stopped in an emergency with the START/STOP button.
If the cleaning process has been stopped without automatic completion, it
is mandatory to remove all undissolved detergent tablet pieces from the
chamber before proceeding with the final rinse.
If, at the end of any of the automatic cleaning processes, you find that there are still traces
of detergent in the chamber (even behind the fan protection plate), run a self-cleaning
program without detergent again or carry out a thorough manual rinse of the cooking
chamber.
If there is a power failure during the cleaning process, the oven will resume the cleaning
process from the beginning.
The oven will turn off automatically at the end of the cleaning process (only firmware 1.7
and higher).
6.2.
NightWatch
NightWatch allows the oven to automatically continue a cooking process after a power
failure. This functionality is especially useful for unattended cooking.
This function will only continue with one cooking in the event of a power
failure and subsequent recovery of the power supply.
This function can be disabled by your dealer. Make sure that you fully
understand the risks of its use.
When a power failure and subsequent restoration of the power supply occur, the oven
recovers the cooking in progress (if any) and continues it with the same parameters as
before the power failure.
In the event of a power failure during a wash, the oven starts the self-cleaning process from
scratch.
