Mychef COOK PRO Page 18 Product Manual Download

Page: 18 / 57

mychefcooking.com

PRODUCT MANUAL COOK UP | COOK PRO - DT.MP.CK.2102.2

Block

Function

Description

Convection button

Convection mode selection button.

Convection mode
indicator

Mark the chosen mode.

Mixed mode button

Mixed mode selection button.

Mixed mode indicator

Mark the chosen mode.

Steam button

Steam mode selection button.

Steam mode indicator

Mark the chosen mode.

Display

Displays the selected parameter: humidity, temperature,
time, or fan speed.

Adjustment button -

Decreases

the

selected

parameter:

humidity,

temperature, time, or fan speed.

Adjustment

Increases the selected parameter: humidity, temperature,
time, or fan speed.

Moisture button

Moisture selection button.

Temperature button

Temperature selection button.

Time button

Time selection button.

Fan speed button

Fan speed selection button.

Self-cleaning CLEAN
button

Button for selecting the self-cleaning program.

START/STOP button

Oven on/off and start/stop button.

If the oven is on, but not cooking/washing, slight pressure
will start the cooking/washing cycle.

If the oven is on and cooking/washing, slight pressure will
cancel the cooking/washing cycle.

Table 6. Control panel description

The central display is a very important part when interacting with the oven, since it indicates
the value of each cooking parameter.

Summary of Contents for COOK PRO


























































Search results

Summary of Contents for COOK PRO

Reviews:

Related manuals for COOK PRO

Brands by name

Popular brands

Mychef COOK PRO, Product Manual

Search results

Summary of Contents for COOK PRO

Reviews:

Related manuals for COOK PRO

Brands by name

Popular brands