MyBinding Afinia Label L701, Instruction Manual

Page: 21 / 85

20
Using the Printer
Figure 6 Printing Preferences
Adjust horizontal and vertical print position.
See Adjust Alignment for Printing .
Display a print confirmation message before printing.
Use the settings on the printer
control panel.
Print pages without any gap (continuous media only)
Render entire document to disk before sending to the
printer. Select this option if labels are skipped when
printing large files.
Select this option if labels are skipped when printing
small labels.
Select this option to remove print artifacts with
image file with multiple layers.
Select the Media Type that matches the media
loaded in the printer.
Sheets per cut – Cut after printing the specified number
of labels.
Print and Present – Print, cut, and present label.
Remove the label to continue printing.
Roll to Roll – Select Roll to Roll if a rewinder is used.
Choose whether to print the first label or print multiple
jobs without cuts in ‐ between.
Adjust the various offsets
MyBinding.com
5500 NE Moore Court
Hillsboro, OR 97124
Toll Free: 1-800-944-4573
Local: 503-640-5920